IC Chips | IC Chip | IC Components | manufacturer supplier Wholesale Distributors-icchips.org IC Chips manufacturer and IC Chip supplier also Wholesale Distributors-over 5,862 ,IC Components,IC Component,IC Electronic Components buyers around the world at icchips.org http://www.icchips.org/ Mon, 24 Jul 2017 18:35:24 -0600 CMOS IC <img src='productpic/ps_qlvd1458097979.jpg' /><br><ol> <li> IC SWITCH QUAD SPST 16TSSOP </li> <li> Description: 1.5 Ω On Resistance, ±15 V/+12 V/±5 V, iCMOS, Quad SPST Switches </li> <li> Application: Automated test equipment, Data acquisition systems, Battery-powered systems, Sample-and-hold systems, Audio signal routing, Video signal routing,&nbsp; Communications systems </li> <li> Dimensions : 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP </li> <li> FEATURES: Qualified for automotive applications </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cmos-ic.html CMOS IC http://www.icchips.org/productpic/ps_qlvd1458097979.jpg http://www.icchips.org/cmos-ic.html RS232 Line Drivers <img src='productpic/ps_c9lo1458098019.jpg' /><br>RS-232 Line Drivers/Receivers<br /> <ol> <li> Dual Transmitter/Receiver RS-232 16-Pin PDIP N Tube<br /> </li> <li> Description: EMI/EMC-Compliant, ±15 kV, ESD-Protected RS-232 Line Drivers/Receivers </li> <li> Application: General-purpose RS-232 data link, portable instruments, PDAs </li> <li> Features: Complies with 89/336/EEC EMC directive<br /> ESD protection to IEC1000-4-2 (801.2)<br /> ±8 kV: contact discharge <br /> ±15 kV: air-gap discharge <br /> ±15 kV: human body model <br /> EFT fast transient/burst immunity (IEC1000-4-4) <br /> Low EMI emissions (EN55022) <br /> 230 kbits/s data rate guaranteed <br /> TSSOP package option </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/rs232-line-drivers.html RS232 Line Drivers http://www.icchips.org/productpic/ps_c9lo1458098019.jpg http://www.icchips.org/rs232-line-drivers.html Analog To Digital Converter <img src='productpic/ps_zhl51458098059.jpg' /><br>Analog-To-Digital Converter (ADC)<br /> <ol> <li> 16-Bit, 1 MSPS PulSAR ADC in MSOP/LFCSP </li> <li> Description: 16-bit, successive approximation, analog-todigital converter (ADC) </li> <li> Application: Battery-powered equipment, communications, ATE, data acquisitions, medical instruments </li> <li> Features: 16-bit resolution with no missing codes<br /> Throughput: 1 MSPS<br /> Low power dissipation<br /> 4 mW at 1 MSPS (VDD only)<br /> 7 mW at 1 MSPS (total)<br /> 70 µW at 10 kSPS<br /> INL: ±0.6 LSB typical, ±1.25 LSB maximum<br /> SINAD: 91.25 dB at 10 kHz<br /> THD: −110 dB at 10 kHz<br /> Pseudo differential analog input range </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/analog-to-digital-converter.html Analog To Digital Converter http://www.icchips.org/productpic/ps_zhl51458098059.jpg http://www.icchips.org/analog-to-digital-converter.html Video Encoder IC <img src='productpic/ps_0udu1458098085.jpg' /><br><ol> <li> Digital PAL/NTSC Video Encoder with 10-Bit, SSAF™ and Advanced Power Management </li> <li> Application: High performance DVD playback systems, portable video </li> <li> Equipment including digital still cameras and laptop PCs, video games, PC video/multimedia and digital satellite/cable systems (set-top boxes/IRD) </li> <li> Features: ITU-R1 BT601/656 YCrCb to PAL/NTSC video encoder<br /> High quality 10-bit video DACs<br /> SSAF (super sub-alias filter)<br /> Advanced power management Features<br /> CGMS (copy generation management system)<br /> WSS (wide screen signalling)<br /> Simultaneous Y, U, V, C output format<br /> NTSC M, PAL M/N2, PAL B/D/G/H/I, PAL60<br /> Single 27 MHz clock required (×2 oversampling)<br /> 80 dB video SNR<br /> 32-bit direct digital synthesizer for color subcarrier </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/video-encoder-ic.html Video Encoder IC http://www.icchips.org/productpic/ps_0udu1458098085.jpg http://www.icchips.org/video-encoder-ic.html Driver Components <img src='productpic/ps_mx131458098103.jpg' /><br>Drivers/Receivers<br /> <ol> <li> Low Power, 3.3 V, RS-232 Line Drivers/Receivers </li> <li> Description: The ADM3202/ADM3222/ADM1385 transceivers are high speed, 2-channel RS-232/V.28 interface devices that operate from a single 3.3 V power supply. </li> <li> Application:<br /> General-purpose RS-232 data link<br /> Portable instruments<br /> Printers, palmtop computers, PDAs </li> <li> Features:<br /> 460 kbps data rate<br /> Specified at 3.3 V<br /> Meets EIA-232E specifications<br /> 0.1 μF charge pump capacitors<br /> Low power shutdown (ADM3222 and ADM1385)<br /> PDIP, SOIC_N, SOIC_W, SSOP, and TSSOP options<br /> Upgrade for MAX3222/MAX3232 and LTC1385<br /> ESD protection to IEC 1000-4-2 (801.2) on RS-232 pins (ADM3202 only)<br /> ±8 kV: contact discharge<br /> ±15 kV: air gap discharge </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/driver-components.html Driver Components http://www.icchips.org/productpic/ps_mx131458098103.jpg http://www.icchips.org/driver-components.html Digital To Analog Converter <img src='productpic/ps_q7921458098125.jpg' /><br><ol> <li> Octal, 12-/14-/16-Bit SPI Voltage Output denseDAC with 5 ppm/°C On-Chip Reference </li> <li> Description: The AD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. </li> <li> Application: <br /> Process control, Data acquisition systems, portable battery-powered instruments Digital gain and offset adjustment, programmable voltage and current sources Programmable attenuators </li> <li> Features: <br /> Low power, small footprint, pin-compatible octal DACs <br /> -AD5668: 16 bits <br /> -AD5648: 14 bits <br /> -AD5628: 12 bits <br /> 14-lead/16-lead TSSOP, 16-lead LFCSP, and 16-lead WLCSP <br /> On-chip 1.25 V/2.5 V, 5 ppm/°C reference <br /> Power down to 400 nA at 5 V, 200 nA at 3 V <br /> 2.7 V to 5.5 V power supply <br /> Guaranteed monotonic by design <br /> Power-on reset to zero scale or midscale <br /> 3 power-down functions <br /> Hardware LDAC and LDAC override function <br /> CLR function to programmable code <br /> Rail-to-rail operation </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/digital-to-analog-converter.html Digital To Analog Converter http://www.icchips.org/productpic/ps_q7921458098125.jpg http://www.icchips.org/digital-to-analog-converter.html IC DVR <img src='productpic/ps_q1j1458100562.jpg' /><br>IC RS232 LINE DVR/RCVR<br /> <ol> <li> 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiver With ±15-kV IEC ESD Protection </li> <li> Description: The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). </li> <li> Application: <ul> <li> Battery-Powered Systems </li> <li> Notebooks </li> <li> Laptops </li> <li> Palmtop PCs </li> <li> Hand-Held Equipment </li> <li> Features: ESD Protection for RS-232 Bus Pins </li> <li> Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards </li> <li> Operates With 3-V to 5.5-V VCC Supply </li> <li> Operates up to 250 kbit/s </li> <li> Two Drivers and Two Receivers </li> <li> Low Supply Current: 300 μA (Typical) </li> <li> External Capacitors: 4 × 0.1 Μf </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/ic-dvr.html IC DVR http://www.icchips.org/productpic/ps_q1j1458100562.jpg http://www.icchips.org/ic-dvr.html Isolation Amplifier <img src='productpic/ps_rt641458100582.jpg' /><br><ol> <li> Precision Lowest-Cost Isolation Amplifier </li> <li> Description: a precision isolation amplifier incorporating a novel duty cycle modulation-demodulation technique. </li> <li> Application: <ul> <li> Industrial Process Control: </li> <li> Ground Loop Elimination </li> <li> Motor and SCR Control </li> <li> Power Monitoring </li> <li> PC-Based Data Acquisition </li> <li> Test Equipment </li> </ul> </li> <li> Features: <ul> <li> 100% Tested for High-Voltage Breakdown </li> <li> Rated 1500 Vrms </li> <li> High IMR: 140 dB at 60 Hz </li> <li> 0.010% Maximum Nonlinearity </li> <li> Bipolar Operation: VO = ±10 V </li> <li> DIP-16 and SO-28 </li> <li> Ease of Use: Fixed Unity Gain Configuration </li> <li> ±4.5-V to ±18-V Supply Range </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/isolation-amplifier.html Isolation Amplifier http://www.icchips.org/productpic/ps_rt641458100582.jpg http://www.icchips.org/isolation-amplifier.html Operational Amplifier <img src='productpic/ps_cr401458100598.jpg' /><br><ol> <li> High Precision Operational Amplifiers </li> <li> Description: The OPAx277 series precision operational amplifiers replace the industry standard OP-17 </li> <li> Application: <ul> <li> Transducer Amplifiers </li> <li> Bridge Amplifiers </li> <li> Temperature Measurements </li> <li> Strain Gage Amplifiers </li> <li> Precision Integrators </li> <li> Battery-Powered Instruments </li> <li> Test Equipment </li> </ul> </li> <li> Features: <ul> <li> Ultralow Offset Voltage: 10 Μv </li> <li> Ultralow Drift: ±0.1 μV/°C </li> <li> High Open-Loop Gain: 134 dB </li> <li> High Common-Mode Rejection: 140 dB </li> <li> High Power Supply Rejection: 130 dB </li> <li> Low Bias Current: 1-nA maximum </li> <li> Wide Supply Range: ±2 V to ±18 V </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/operational-amplifier.html Operational Amplifier http://www.icchips.org/productpic/ps_cr401458100598.jpg http://www.icchips.org/operational-amplifier.html Operational Amplifiers <img src='productpic/ps_zi351458100616.jpg' /><br><ol> <li> High Input Voltage, Buck-Boost Converter With 2-A Switch Current </li> <li> Description: The TPS6306x devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. </li> <li> Application: <ul> <li> Dual Li-Ion Application </li> <li> DSCs and Camcorders </li> <li> Notebook Computer </li> <li> Industrial Metering Equipment </li> <li> Ultra Mobile PCs and Mobile. Internet Devices </li> <li> Personal Medical Products </li> <li> High-Power LEDs </li> </ul> </li> <li> Features: <ul> <li> Input Voltage Range: 2.5 V to 12 V </li> <li> Efficiency: Up to 93% </li> <li> Output Current at 5 V (VIN &lt;10 V): 2 A in Buck Mode </li> <li> Output Current at 5 V ( VIN &gt;4 V): 1.3 A in Boost Mode </li> <li> Automatic Transition Between Step Down and Boost Mode </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/operational-amplifiers.html Operational Amplifiers http://www.icchips.org/productpic/ps_zi351458100616.jpg http://www.icchips.org/operational-amplifiers.html Amplifier IC <img src='productpic/ps_5tnc1458100634.jpg' /><br>Operational Amplifiers<br /> <ol> <li> High-Speed, Single-Supply, Rail-to-Rail Operational Amplifiers MicroAmplifier Series </li> <li> Description: The OPA350 series of rail-to-rail CMOS operational amplifiers are optimized for low voltage, single-supply operation. </li> <li> Application: <ul> <li> Cell Phone PA Control Loops </li> <li> Driving A/D Converters </li> <li> Video Processing </li> <li> Data Acquisition </li> <li> Process Controls </li> <li> Audio Processing </li> <li> Communications </li> <li> Active Filters </li> <li> Test Equipment </li> </ul> </li> <li> Features: <ul> <li> Rail-to-Rail Input </li> <li> Rail-to-Rail Output (Within 10 mV) </li> <li> Wide Bandwidth: 38 MHz </li> <li> High Slew Rate: 22 V/μs </li> <li> Low Noise: 5 nV/√Hz </li> <li> Low THD+Noise: 0.0006% </li> <li> Unity-Gain Stable </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/amplifier-ic.html Amplifier IC http://www.icchips.org/productpic/ps_5tnc1458100634.jpg http://www.icchips.org/amplifier-ic.html Equalizer IC <img src='productpic/ps_ar391458100650.jpg' /><br>Equalizer<br /> <ol> <li> SMPTE 292M / 259M Adaptive Cable Equalizer </li> <li> Description: The LMH0044 SMPTE 292M / 259M adaptive cable equalizer is a monolithic integrated circuit for equalizing data transmitted over cable (or any media with similar dispersive loss characteristics). </li> <li> Application: <ul> <li> SMPTE 292M, SMPTE 344M, and SMPTE 259M Serial Digital Interfaces </li> <li> Serial Digital Data Equalization and Reception </li> <li> Data Recovery Equalization </li> </ul> </li> <li> Features: <ul> <li> SMPTE 292M, SMPTE 344M and SMPTE 259M Compliant </li> <li> Supports DVB-ASI at 270 Mbps </li> <li> Data rates: 125 Mbps to 1.485 Gbps </li> <li> Equalizes up to 200 Meters of Belden 1694A at 1.485 Gbps or up to 400 meters of Belden 1694A at 270 Mbps </li> <li> Manual Bypass and Output Mute with a Programmable Threshold </li> <li> Single-Ended or Differential Input </li> <li> 50Ω Differential Outputs </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/equalizer-ic.html Equalizer IC http://www.icchips.org/productpic/ps_ar391458100650.jpg http://www.icchips.org/equalizer-ic.html Driver IC <img src='productpic/ps_7b7x1458100667.jpg' /><br><ol> <li> Low-Voltage Motor Driver IC </li> <li> Description: The DRV8832 provides an integrated motor driver solution for battery-powered toys, printers, and other low-voltage or battery-powered motion control applications. </li> <li> Application: <ul> <li> Battery-Powered:<br /> – Printers&nbsp; – Toys&nbsp; – Robotics – Cameras – Phones </li> <li> Small Actuators, Pumps, and so forth </li> </ul> </li> <li> Features: <ul> <li> H-Bridge Voltage-Controlled Motor Driver<br /> – Drives DC Motor, One Winding of a Stepper Motor, or Other Actuators/Loads<br /> – Efficient PWM Voltage Control for Constant Motor Speed With Varying Supply Voltages<br /> – Low MOSFET On-Resistance: HS + LS 450 mΩ </li> <li> 1-A Maximum DC/RMS or Peak Drive Current </li> <li> 2.75-V to 6.8-V Operating Supply Voltage Range </li> <li> 300-nA (Typical) Sleep Mode Current </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/driver-ic.html Driver IC http://www.icchips.org/productpic/ps_7b7x1458100667.jpg http://www.icchips.org/driver-ic.html RS232 Transceiver <img src='productpic/ps_jmcc1458099623.jpg' /><br>RS-232 Transceivers<br /> <ol> <li> 3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1µF External Capacitors </li> <li> Description: The MAX3222/MAX3232 transceivers have a proprietary low-dropout transmitter output stage enabling true RS-232 performance from a 3.0V to 5.5V supply with a dual charge pump. </li> <li> Application: <ul> <li> Notebook, Subnotebook, and Palmtop Computers </li> <li> High-Speed Modems </li> <li> Battery-Powered Equipment </li> <li> Hand-Held Equipment </li> <li> Peripherals </li> <li> Printers </li> </ul> </li> <li> Features: <ul> <li> For Smaller Packaging: MAX3228E/MAX3229E: +2.5V to +5.5V RS-232 Transceivers in UCSP™ </li> <li> For Low-Voltage or Data Cable Applications: MAX3380E/MAX3381E: +2.35V to +5.5V, 1µA, 2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/rs232-transceiver.html RS232 Transceiver http://www.icchips.org/productpic/ps_jmcc1458099623.jpg http://www.icchips.org/rs232-transceiver.html RS485 Transceiver <img src='productpic/ps_luw01458099641.jpg' /><br>RS-485 Transceiver<br /> <ol> <li> ±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, +3.3V RS-485 Transceiver. </li> <li> Description: The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communication bus lines. &nbsp; </li> <li> Application: <ul> <li> RS-422/RS-485 Communications </li> <li> Lighting Systems </li> <li> Industrial-Control Local Area Networks </li> <li> Profibus Applications </li> <li> Multimaster RS-485 Networks </li> </ul> </li> <li> Features: <ul> <li> ±80V Fault Protection </li> <li> ±12kV ESD Protection </li> <li> +3.3V Operation </li> <li> Internal Slew-Rate Limiting </li> <li> 250kbps Data Rate </li> <li> Allows Up to 128 Transceivers on the Bus </li> <li> -7V to +12V Common-Mode Input Voltage Range </li> <li> True Fail-Safe Inputs&nbsp; Hot-Swap Input Structure on DE </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor, reconfirm before order. </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/rs485-transceiver.html RS485 Transceiver http://www.icchips.org/productpic/ps_luw01458099641.jpg http://www.icchips.org/rs485-transceiver.html Transceiver IC <img src='productpic/ps_86nv1458099660.jpg' /><br>RS-485/RS-422 Transceivers<br /> <ol> <li> The MAX3080–MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. </li> <li> Description: The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communication bus lines. </li> <li> Application: <ul> <li> RS-422/RS-485 Communications </li> <li> Level Translators </li> <li> Transceivers for EMI-Sensitive Applications </li> <li> Industrial-Control Local Area Networks </li> </ul> </li> <li> Features: <ul> <li> For Fault-Tolerant Applications: MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V RS-485 Transceiver </li> <li> For Low-Voltage Applications: MAX3362: +3.3V, High-Speed, RS-485/RS-422 Transceiver in a SOT23 Package </li> <li> For Multiple Transceiver Applications: MAX3030E–MAX3033E: ±15kV ESD-Protected, +3.3V, Quad, RS-422 Transmitters MAX3040–MAX3045: ±10kV ESD-Protected, Quad, +5V, RS-485/RS-422 Transmitters </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/transceiver-ic.html Transceiver IC http://www.icchips.org/productpic/ps_86nv1458099660.jpg http://www.icchips.org/transceiver-ic.html IC Transceiver <img src='productpic/ps_0a71458099682.jpg' /><br>RS-485/RS-422 Transceivers<br /> <ol> <li> Single-Channel 1-Wire Master. </li> <li> Description: The DS2482-100 is an I2C-to-1-Wire® bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform bidirectional protocol conversion between the I2C master and any downstream 1-Wire slave devices. </li> <li> Application: <ul> <li> Printers </li> <li> Medical Instruments </li> <li> Industrial Sensors </li> <li> Cell Phones, PDAs </li> </ul> </li> <li> Features: <ul> <li> Allows Easy Interface Between a I2C Microport and a 1-Wire Slave </li> <li> I2C Host Interface Supports 100kHz and 400kHz I2C Communication Speeds </li> <li> 1-Wire Master IO with Selectable Active or Passive 1-Wire Pullup </li> <li> Provides Reset/Presence, 8-Bit, Single-Bit, and 3-Bit 1-Wire IO Sequences </li> <li> Standard and Overdrive 1-Wire Communication Speeds </li> <li> Two Address Inputs for I2C Address Assignment </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/ic-transceiver.html IC Transceiver http://www.icchips.org/productpic/ps_0a71458099682.jpg http://www.icchips.org/ic-transceiver.html Analog Digital Converter <img src='productpic/ps_gztj1458099764.jpg' /><br>A/D Converters<br /> <ol> <li> 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface. </li> <li> Description: The MCP3204/3208 devices are successive approximation 12-bit Analogto-Digital (A/D) Converters with on-board sample and hold circuitry. &nbsp; </li> <li> Application: <ul> <li> Sensor Interface </li> <li> Process Control </li> <li> Data Acquisition </li> <li> Battery Operated Systems </li> </ul> </li> <li> Features: <ul> <li> 12-bit resolution </li> <li> ± 1 LSB max DNL </li> <li> ± 1 LSB max INL (MCP3204/3208-B) </li> <li> ± 2 LSB max INL (MCP3204/3208-C) </li> <li> 4 (MCP3204) or 8 (MCP3208) input channels </li> <li> Analog inputs programmable as single-ended or pseudo-differential pairs </li> <li> On-chip sample and hold SPI serial interface (modes 0,0 and 1,1) </li> <li> Single supply operation: 2.7V 5.5V </li> <li> 100 ksps max. sampling rate at VDD = 5V </li> <li> 50 ksps max. sampling rate at VDD = 2.7V </li> <li> Low power CMOS technology: 500 nA typical standby current, 2 µA max. 400 µA max. active current at 5V </li> <li> Industrial temp range: -40°C to +85°C </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/analog-digital-converter.html Analog Digital Converter http://www.icchips.org/productpic/ps_gztj1458099764.jpg http://www.icchips.org/analog-digital-converter.html Microcontroller IC <img src='productpic/ps_ckkh1458099783.jpg' /><br>Microcontrollers<br /> <div align="left"> <ol> <li> 8-Pin, 8-Bit CMOS Microcontrollers. </li> <li> Description: The PIC12C5XX from Microchip Technology is a family of low-cost, high performance, 8-bit, fully static, EEPROM/EPROM/ROM-based CMOS microcontrollers. </li> <li> Application: <ul> <li> Personal care appliances </li> <li> Security systems </li> </ul> </li> <li> Features: <ul> <li> 8-bit real time clock/counter (TMR0) with 8-bit programmable prescaler Power-On Reset (POR) Device Reset Timer (DRT) </li> <li> Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation </li> <li> Programmable code-protection </li> <li> 1,000,000 erase/write cycle EEPROM data memory </li> <li> EEPROM data retention &gt; 40 years </li> <li> Power saving SLEEP mode </li> <li> Wake-up from SLEEP on pin change </li> <li> Internal weak pull-ups on I/O pins </li> <li> Internal pull-up on MCLR pin </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> </div> http://www.icchips.org/microcontroller-ic.html Microcontroller IC http://www.icchips.org/productpic/ps_ckkh1458099783.jpg http://www.icchips.org/microcontroller-ic.html IC Microcontroller <img src='productpic/ps_gj6b1458099798.jpg' /><br>Microcontrollers<br /> <ol> <li> 8-Pin Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology </li> <li> Description: The PIC12C5XX from Microchip Technology is a family of low-cost, high performance, 8-bit, fully static, EEPROM/EPROM/ROM-based CMOS microcontrollers. </li> <li> Features: <ul> <li> Precision Internal Oscillator: </li> <li> Factory calibrated to ±1%, typical .Software selectable frequency range of 8 MHz to 125 kHz </li> <li> Software tunable </li> <li> Two-Speed Start-up mode </li> <li> Crystal fail detect for critical applications </li> <li> Clock mode switching during operation for power savings </li> <li> Power-Saving Sleep mode </li> <li> Wide operating voltage range (2.0V-5.5V) </li> <li> Industrial and Extended temperature range </li> <li> Power-on Reset (POR) </li> <li> Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/ic-microcontroller.html IC Microcontroller http://www.icchips.org/productpic/ps_gj6b1458099798.jpg http://www.icchips.org/ic-microcontroller.html 8 Bit Microcontroller <img src='productpic/ps_4yv1458099817.jpg' /><br>Microcontrollers<br /> <ol> <li> 28/40-Pin 8-Bit CMOS FLASH Microcontrollers. </li> <li> Description: The PIC16F876/873 devices come in 28-pin packages and the PIC16F877/874 devices come in 40-pin packages. </li> <li> The Parallel Slave Port is not implemented on the 28-pin devices. </li> <li> Features: <ul> <li> High performance RISC CPU </li> <li> Only 35 single word instructions to learn </li> <li> All single cycle instructions except for program branches which are two cycle </li> <li> Operating speed: DC 20 MHz clock input DC 200 ns instruction cycle Up to 8K x 14 words of FLASH Program Memory, Up to 368 x 8 bytes of Data Memory (RAM) Up to 256 x 8 bytes of EEPROM Data Memory </li> <li> Pinout compatible to the PIC16C73B/74B/76/77 </li> <li> Interrupt capability (up to 14 sources) </li> <li> Eight level deep hardware stack </li> <li> Direct, indirect and relative addressing modes </li> <li> Power-on Reset (POR) </li> <li> Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/8-bit-microcontroller.html 8 Bit Microcontroller http://www.icchips.org/productpic/ps_4yv1458099817.jpg http://www.icchips.org/8-bit-microcontroller.html CMOS Microcontroller <img src='productpic/ps_qr3b1458099843.jpg' /><br>Microcontrollers<br /> <ol> <li> 8-Bit CMOS Microcontrollers with A/D Converter </li> <li> Description: The PIC16C63A/65B/73B/74B devices are low cost, high performance, CMOS, fully-static, 8-bit microcontrollers in the PIC16CXX mid-range family. </li> <li> Features: <ul> <li> High performance RISC CPU </li> <li> Only 35 single word instructions to learn </li> <li> All single cycle instructions except for program branches which are two cycle </li> <li> Operating speed: DC - 20 MHz clock input DC - 200 ns instruction cycle 4 K x 14 words of Program Memory, 192 x 8 bytes of Data Memory (RAM) </li> <li> Interrupt capability Eight-level deep hardware stack </li> <li> Direct, indirect and relative addressing modes Power-on Reset (POR) </li> <li> Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) </li> <li> Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation </li> <li> Programmable code protection Power-saving SLEEP mode </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cmos-microcontroller.html CMOS Microcontroller http://www.icchips.org/productpic/ps_qr3b1458099843.jpg http://www.icchips.org/cmos-microcontroller.html MCU Microcontroller <img src='productpic/ps_iaey1458099862.jpg' /><br>MCU<br /> <ol> <li> 18/20/28-Pin Enhanced Flash MCUs with nanoWatt Technology </li> <li> Description: The PIC16F87/88 belongs to the Mid-Range family of the PIC® devices. </li> <li> Features: <ul> <li> Power-Managed modes: <br /> - Primary Run: RC oscillator, 76 A, 1 MHz, 2V <br /> - RC_RUN: 7 A, 31.25 kHz, 2V <br /> - SEC_RUN: 9 A, 32 kHz, 2V <br /> - Sleep: 0.1 A, 2V </li> <li> Timer1 Oscillator: 1.8 A, 32 kHz, 2V </li> <li> Watchdog Timer: 2.2 A, 2V </li> <li> Two-Speed Oscillator Start-up </li> <li> Capture, Compare, PWM (CCP) module: <br /> - Capture is 16-bit, max. resolution is 12.5 ns <br /> - Compare is 16-bit, max. resolution is 200 ns <br /> - PWM max. resolution is 10-bit </li> <li> 10-bit, 7-channel Analog-to-Digital Converter </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/mcu-microcontroller.html MCU Microcontroller http://www.icchips.org/productpic/ps_iaey1458099862.jpg http://www.icchips.org/mcu-microcontroller.html CMOS 8 Bit Microcontroller <img src='productpic/ps_8ew1458099881.jpg' /><br>Microcontrollers<br /> <ol> <li> Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology </li> <li> Description: The PIC16F627A/628A/648A are 18-pin Flash-based members of the versatile PIC16F627A/628A/648A family of low-cost, high-performance, CMOS, fullystatic, 8-bit microcontrollers. </li> <li> Features: <ul> <li> Internal and external oscillator options: <br /> - Precision internal 4 MHz oscillator factory calibrated to ±1% <br /> - Low-power internal 48 kHz oscillator <br /> - External Oscillator support for crystals and resonators </li> <li> Power-saving Sleep mode Programmable weak pull-ups on PORTB </li> <li> Multiplexed Master Clear/Input-pin </li> <li> Watchdog Timer with independent oscillator for reliable operation </li> <li> Low-voltage programming In-Circuit Serial Programming™ (via two pins) </li> <li> Programmable code protection </li> <li> Brown-out Reset </li> <li> Power-on Reset </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cmos-8-bit-microcontroller.html CMOS 8 Bit Microcontroller http://www.icchips.org/productpic/ps_8ew1458099881.jpg http://www.icchips.org/cmos-8-bit-microcontroller.html Flash Microcontroller <img src='productpic/ps_guf1458099900.jpg' /><br>Microcontrollers<br /> <ol> <li> 64/80/100-Pin High-Performance, 1-Mbit Flash Microcontrollers with Ethernet. </li> <li> Description: This family introduces a new line of low-voltage devices with the foremost traditional advantage of all PIC18 microcontrollers – namely, high computational performance and a rich feature set at an extremely competitive price point. </li> <li> Features: <ul> <li> IEEE 802.3™ Compatible Ethernet Controller </li> <li> Fully Compatible with 10/100/1000Base-T Networks </li> <li> Integrated MAC and 10Base-T PHY </li> <li> 8-Kbyte Transmit/Receive Packet Buffer SRAM </li> <li> Supports One 10Base-T Port Programmable Automatic Retransmit on Collision </li> <li> Programmable Padding and CRC Generation </li> <li> Programmable Automatic Rejection of Erroneous Packets </li> <li> Activity Outputs for 2 LED Indicators </li> <li> Buffer: <br /> - Configurable transmit/receive buffer size <br /> - Hardware-managed circular receive FIFO <br /> - Byte-wide random and sequential access - Internal DMA for fast memory copying <br /> - Hardware assisted checksum calculation for various protocols </li> </ul> </li> <li> Delivery time: Usually 5-7 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/flash-microcontroller.html Flash Microcontroller http://www.icchips.org/productpic/ps_guf1458099900.jpg http://www.icchips.org/flash-microcontroller.html SRAM Chip <img src='productpic/ps_k49j1458100431.jpg' /><br>SRAM<br /> <ol> <li> 32Mb Advanced LPSRAM (2M word x 16bit / 4M word x 8bit) </li> <li> Description: The R1LV3216R Series is a family of low voltage 32-Mbit static RAMs organized as 2,097,152-word by 16-bit, fabricated by Renesas’s high-performance 0.15um CMOS and TFT technologies. </li> <li> Application: Battery operating and Battery backup </li> <li> Features: <ul> <li> Single 2.7~3.6V power supply </li> <li> Small stand-by current: 4 µA (3.0V, typical) </li> <li> No clocks, No refresh </li> <li> All inputs and outputs are TTL compatible. </li> <li> Easy memory expansion by CS1#, CS2, LB# and UB# </li> <li> Common Data I/O </li> <li> Three-state outputs: OR-tie Capability </li> <li> OE# prevents data contention on the I/O bus </li> </ul> </li> <li> Delivery time: STOCK </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/sram-chip.html SRAM Chip http://www.icchips.org/productpic/ps_k49j1458100431.jpg http://www.icchips.org/sram-chip.html SRAM IC <img src='productpic/ps_x9011458100450.jpg' /><br>SRAM<br /> <ol> <li> 16Mb Advanced LPSRAM (1M wordx16bit / 2M wordx8bit) </li> <li> Description: The R1LV1616R Series is a family of low voltage 16-Mbit static RAMs organized as 1048576-words by 16-bit, fabricated by Renesas's high-performance 0.15um CMOS and TFT technologies. </li> <li> Applicaiton: Battery operating and Battery backup </li> <li> Features: <ul> <li> Single 2.7-3.6V power supply </li> <li> Small stand-by current: 2µA (3.0V, typ.) </li> <li> Data retention supply voltage =2.0V </li> <li> No clocks, No refresh </li> <li> All inputs and outputs are TTL compatible </li> <li> Easy memory expansion by CS1#, CS2, LB# and UB# </li> <li> Common Data I/O </li> <li> Three-state outputs: OR-tie capability </li> <li> OE# prevents data contention on the I/O bus </li> <li> Process technology: 0.15um CMOS </li> </ul> </li> <li> Delivery time: Usually 7-10 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/sram-ic.html SRAM IC http://www.icchips.org/productpic/ps_x9011458100450.jpg http://www.icchips.org/sram-ic.html Microchip SRAM <img src='productpic/ps_9041458100475.jpg' /><br>SRAM<br /> <ol> <li> 64Mb Advanced LPSRAM (4M word x 16bit / 8M word x 8bit) </li> <li> Description: The R1WV6416R Series is a family of low voltage 64-Mbit static RAMs organized as 4,194,304-word by 16-bit, fabricated by Renesas’s high-performance 0.15um CMOS and TFT technologies. </li> <li> The R1WV6416R Series is suitable for memory applications where a simple interfacing, battery operating and battery backup are the important design objectives. </li> <li> Features: <ul> <li> Single 2.7~3.6V power supply </li> <li> Small stand-by current: 8 µA (3.0V, typical) </li> <li> No clocks, No refresh </li> <li> All inputs and outputs are TTL compatible. </li> <li> Easy memory expansion by CS1#, CS2, LB# and UB# </li> <li> Common Data I/O </li> <li> Three-state outputs: OR-tie Capability </li> <li> OE# prevents data contention on the I/O bus </li> </ul> </li> <li> Delivery time: STOCK </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/microchip-sram.html Microchip SRAM http://www.icchips.org/productpic/ps_9041458100475.jpg http://www.icchips.org/microchip-sram.html Static RAM <img src='productpic/ps_5t9z1458100496.jpg' /><br>SRAM<br /> <ol> <li> Wide Temperature Range Version 16 M SRAM (1-Mword × 16-bit) </li> <li> Description: The R1LV1616HBG-I Series is 16-Mbit static RAM organized 1-Mword × 16-bit. R1LV1616HBG-I Series has realized higher density, higher performance and low power consumption by employing CMOS process technology (6- transistor memory cell). It offers low power standby power dissipation; therefore, it is suitable for battery backup systems. </li> <li> Features: <ul> <li> Single 3.0 V supply: 2.7 V to 3.6 V </li> <li> Fast access time: 45/55 ns (max) </li> <li> Power dissipation: <br /> -Active: 9 mW/MHz (typ) <br /> -Standby: 1.5 µW (typ) </li> <li> Completely static memory. <br /> -No clock or timing strobe required </li> <li> Equal access and cycle times </li> <li> Common data input and output. <br /> -Three state output </li> <li> Battery backup operation. <br /> -2 chip selection for battery backup </li> <li> Temperature range: −40 to +85°C </li> </ul> </li> <li> Delivery time: Usually 7-10 days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/static-ram.html Static RAM http://www.icchips.org/productpic/ps_5t9z1458100496.jpg http://www.icchips.org/static-ram.html Hard Disk Drive <img src='productpic/ps_bsp11463970596.jpg' /><br>Description:<br /> Capacity: 300GB<br /> Spindle Speed: 15,000RPM<br /> Interface Type: SAS Serial Attached SCSI<br /> Disk Size: 3.5inx1.0in LFF Hard Drive<br /> Sustained Throughput (MBps): 122 - 204<br /> Average Seek Time (read/write ms): 3.4 / 3.9<br /> Electrical Interface Speed: SAS-2 Serial Attached SCSI v2 - 6.0Gbps<br /> On-Board Cache: 16MB<br /> Delivery time:1-2WEEKS<br /> Payment: T/T in advance<br /> http://www.icchips.org/hard-disk-drive.html Hard Disk Drive http://www.icchips.org/productpic/ps_bsp11463970596.jpg http://www.icchips.org/hard-disk-drive.html Hard Disk Driver <img src='productpic/ps_f9nb1463970609.jpg' /><br>HGST Ultrastar 7K4000<br /> 4TB 7200 RPM 64MB Cache SAS 6Gb/s 3.5" Enterprise Hard Drive Bare Drive<br /> 2.0 million hours MTBF<br /> For Enterprise Storage, 24x7 accessibility for enterprise-class, capacity-optimized applications<br /> Delivery time: 5-7DAYS<br /> Payment: T/T in advance http://www.icchips.org/hard-disk-driver.html Hard Disk Driver http://www.icchips.org/productpic/ps_f9nb1463970609.jpg http://www.icchips.org/hard-disk-driver.html Hard Disc Drive <img src='productpic/ps_x4d51463970626.jpg' /><br>High Performance– 7200 RPM for faster data access<br /> Big Capacity – Up to 500GB of storage<br /> Low Profile – 7mm thickness for design flexibility<br /> <br /> Interface: SATA 6Gb/s<br /> Capacity (GB): 500 / 320<br /> Recording Zones: 30<br /> Sector Size (Variable, Byes/sector): 512e<br /> Max Areal Density (Gbits/sq. in.): 630<br /> Delivery time: 1-2WEEKS<br /> Payment: T/T in advance<br /> http://www.icchips.org/hard-disc-drive.html Hard Disc Drive http://www.icchips.org/productpic/ps_x4d51463970626.jpg http://www.icchips.org/hard-disc-drive.html Hard Disk Panel <img src='productpic/ps_8nu1463970653.jpg' /><br>Dell/Seagate 600GB 15K 3.5"<br /> 6Gb/s SAS ST3600057SS W347K Hard Drive with Tray<br /> Specifications: SAS 6.0Gb/s, 16MB Cache, Serial Attached SCSI 3.5"<br /> Capacity: 600GB<br /> Spindle Speed: 15,000RPM<br /> Interface Type: SAS Serial Attached SCSI<br /> Disk Size: 3.5inx1.0in LFF Hard Drive<br /> Sustained Throughput (MBps): up to 171<br /> Average Seek Time (read/write ms): 3.4 / 3.9<br /> Electrical Interface Speed: SAS-2 Serial Attached SCSI v2 - 6.0Gbps<br /> On-Board Cache: 16MB<br /> Delivery time: 2WEEKS<br /> Payment: T/T in advance<br /> http://www.icchips.org/hard-disk-panel.html Hard Disk Panel http://www.icchips.org/productpic/ps_8nu1463970653.jpg http://www.icchips.org/hard-disk-panel.html LCD Screen Panel <img src='productpic/ps_t4vx1463970529.jpg' /><br>Description:<br /> LCD size 7.0 inch(Diagonal)<br /> Resolution 800X3(RGB)X480<br /> Display mode Normally white, Transmissive<br /> Dot pitch 0.0635(W)X0.1905(H) mm<br /> Active area 152.4 (W)X91.44 (H) mm<br /> Module size 165(W)X104(H)X5.5(D) mm<br /> Delivery time: 2-4WEEKS from distributor<br /> Payment: T/T in advance<br /> http://www.icchips.org/lcd-screen-panel.html LCD Screen Panel http://www.icchips.org/productpic/ps_t4vx1463970529.jpg http://www.icchips.org/lcd-screen-panel.html LCD Display Panel <img src='productpic/ps_0d781463970547.jpg' /><br>Description:<br /> Active Area (W x H): 53.64 x 71.52 mm<br /> Brightness: 13% Reflectivity, Transmissive 160 nits<br /> Contrast Ratio: 85:1 Transmissive, 15:1 Reflective<br /> Diagonal Size: 3.5 inch (8.9 cm)<br /> Outline Dimensions (W x H x D): 65.0 x 85.0 x 3.4 mm<br /> Pixel Format: 240 x 320• <br /> Storage Temperature Range: -25°C to 70°C<br /> Delivery time: 5-7DAYS<br /> Payment: T/T in advance<br /> http://www.icchips.org/lcd-display-panel.html LCD Display Panel http://www.icchips.org/productpic/ps_0d781463970547.jpg http://www.icchips.org/lcd-display-panel.html LCD Panel <img src='productpic/ps_mky51463970558.jpg' /><br>Product Category: TFT Displays &amp; Accessories<br /> Background Color: Normally White<br /> Product: TFT LCD Displays<br /> Diagonal: 4.3 in<br /> Backlighting: 9 LED<br /> Module Size - W x H x T: 105.5 mm x 67.2 mm x 5.05 mm<br /> Operating Temperature Range: - 30 C to + 85 C<br /> Packaging: Bulk<br /> Brand: Sharp Microelectronics<br /> Display Resolution - Pixels: 480 x 272<br /> Delivery time: 1-2WEEKS<br /> Payment: T/T in advance<br /> http://www.icchips.org/lcd-panel.html LCD Panel http://www.icchips.org/productpic/ps_mky51463970558.jpg http://www.icchips.org/lcd-panel.html LCD Panels <img src='productpic/ps_fdz41463970575.jpg' /><br>Panel Brand: LG Display<br /> Panel Model: LP121WX4-TLA2<br /> Panel Type: a-Si TFT-LCD, Panel<br /> Panel Size: 12.1 inch<br /> Resolution: 1280(RGB)×800, WXGA<br /> Display Mode: TN, Normally White, Transmissive [Panelook copyright, copy is strictly prohibited]<br /> IPS Family: AAS, ADS, AHVA, FFS, IPS, New Mode2, PLS, SFT, Vistarich<br /> VA Family: ASV, HVA, MVA, PVA, SVA, UV²A, VA<br /> Active Area: 259.594×162.24 mm<br /> Surface: Antiglare<br /> Brightness: 250 cd/m² (Typ.)<br /> Delivery time: 2WEEKS<br /> Payment: T/T in advance<br /> http://www.icchips.org/lcd-panels.html LCD Panels http://www.icchips.org/productpic/ps_fdz41463970575.jpg http://www.icchips.org/lcd-panels.html CMOS Static RAM <img src='productpic/ps_qday1458099225.jpg' /><br>SRAM<br /> <ol> <li> 512K x 16 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC RAM </li> <li> Description: The ISSI IS62WV51216ALL/ IS62WV51216BLL are highspeed, 8M bit static RAMs organized as 512K words by 16 bits. </li> <li> Features: <ul> <li> High-speed access time: 45ns, 55ns </li> <li> CMOS low power operation <br /> – 36 mW (typical) operating <br /> – 12 µW (typical) CMOS standby </li> <li> TTL compatible interface levels </li> <li> Single power supply <br /> – 1.65V--2.2V VDD (62WV51216ALL) <br /> – 2.5V--3.6V VDD (62WV51216BLL) </li> <li> Fully static operation: no clock or refresh required </li> <li> Three state outputs </li> <li> Data control for upper and lower bytes </li> <li> Industrial temperature available </li> <li> Lead-free available </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cmos-static-ram.html CMOS Static RAM http://www.icchips.org/productpic/ps_qday1458099225.jpg http://www.icchips.org/cmos-static-ram.html Static Random Access Memory <img src='productpic/ps_qig41458099246.jpg' /><br>SRAM<br /> <ol> <li> 1Gb (x8, x16) DDR2 SDRAM </li> <li> Description: The ISSI IS62WV51216ALL/ IS62WV51216BLL are highspeed, 8M bit static RAMs organized as 512K words by 16 bits. </li> <li> Features: <ul> <li> Clock frequency up to 400MHz </li> <li> 8 internal banks for concurrent operation </li> <li> 4-bit prefetch architecture </li> <li> Programmable CAS Latency: 3, 4, 5, 6 and 7 </li> <li> Programmable Additive Latency: 0, 1, 2, 3, 4, 5 and 6 </li> <li> Write Latency = Read Latency-1 </li> <li> Programmable Burst Sequence: Sequential or Interleave </li> <li> Programmable Burst Length: 4 and 8 </li> <li> Automatic and Controlled Precharge Command </li> <li> Power Down Mode </li> <li> Auto Refresh and Self Refresh </li> <li> Refresh Interval: 7.8 s (8192 cycles/64 ms) </li> <li> ODT (On-Die Termination) </li> <li> Weak Strength Data-Output Driver Option </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/static-random-access-memory.html Static Random Access Memory http://www.icchips.org/productpic/ps_qig41458099246.jpg http://www.icchips.org/static-random-access-memory.html CMOS RAM <img src='productpic/ps_7ee21458099270.jpg' /><br>SRAM<br /> <ol> <li> 256K x 16 HIGH SPEED ASYNCHRONOUS CMOS STATIC RAM </li> <li> Description:&nbsp; The ISSI IS61WV25616Axx/Bxx and IS64WV25616Bxx are high-speed, 4,194,304-bit static RAMs organized as 262,144 words by 16 bits. </li> <li> Features: <br /> High speed: (IS61/64WV25616ALL/BLL) <ul> <li> High-speed access time: 8, 10, 20 ns </li> <li> Low Active Power: 85 mW (typical) </li> <li> Low Standby Power: 7 mW (typical) CMOS standby </li> <li> LOW POWER: (IS61/64WV25616ALS/BLS) </li> <li> High-speed access time: 25, 35, 45 ns </li> <li> Low Active Power: 35 mW (typical) </li> <li> Low Standby Power: 0.6 mW (typical) CMOS standby </li> <li> Single power supply <br /> — Vdd 1.65V to 2.2V (IS61WV25616Axx) <br /> — Vdd 2.4V to 3.6V (IS61/64WV25616Bxx) </li> <li> Fully static operation: no clock or refresh required </li> <li> Three state outputs </li> <li> Data control for upper and lower bytes </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cmos-ram.html CMOS RAM http://www.icchips.org/productpic/ps_7ee21458099270.jpg http://www.icchips.org/cmos-ram.html CMOS SRAM <img src='productpic/ps_j1lu1458099292.jpg' /><br>SRAM<br /> <ol> <li> 256K x 16 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC SRAM </li> <li> Description: The ISSI IS62WV25616ALL/IS62WV25616BLL are highspeed, low power, 4M bit SRAMs organized as 256K words by 16 bits. </li> <li> Features: <ul> <li> High-speed access time: 55ns, 70ns </li> <li> CMOS low power operation </li> <li> 36 mW (typical) operating 9 µW (typical) CMOS standby </li> <li> TTL compatible interface levels </li> <li> Single power supply </li> <li> 1.65V--2.2V Vdd (IS62WV25616ALL) </li> <li> 2.5V--3.6V Vdd (IS62WV25616BLL) </li> <li> Fully static operation: no clock or refresh required </li> <li> Three state outputs </li> <li> Data control for upper and lower bytes </li> <li> Industrial temperature available </li> <li> Lead-free available </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cmos-sram.html CMOS SRAM http://www.icchips.org/productpic/ps_j1lu1458099292.jpg http://www.icchips.org/cmos-sram.html Synchronous Dynamic RAM <img src='productpic/ps_fvki1458099311.jpg' /><br>SRAM<br /> <ol> <li> 512K Bits x 32 Bits x 4 Banks (64-MBIT) SYNCHRONOUS DYNAMIC RAM </li> <li> Description: ISSI's 64Mb Synchronous DRAM IS42/45S32200E is organized as 524,288 bits x 32-bit x 4-bank for improved performance. </li> <li> Features: <ul> <li> Clock frequency: 200, 166, 143, 133 MHz </li> <li> Fully synchronous; all signals referenced to a positive clock edge </li> <li> Internal bank for hiding row access/precharge </li> <li> Single 3.3V power supply LVTTL interface </li> <li> Programmable burst length: (1, 2, 4, 8, full page) </li> <li> Programmable burst sequence: Sequential/Interleave </li> <li> Self refresh modes </li> <li> 4096 refresh cycles every 16ms (A2 grade) or 64ms (Commercia, Industrial, A1 grade) </li> <li> Random column address every clock cycle </li> <li> Programmable CAS latency (2, 3 clocks) </li> <li> Burst read/write and burst read/single write operations capability </li> <li> Burst termination by burst stop and precharge command </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/synchronous-dynamic-ram.html Synchronous Dynamic RAM http://www.icchips.org/productpic/ps_fvki1458099311.jpg http://www.icchips.org/synchronous-dynamic-ram.html Synchronous DRAM <img src='productpic/ps_q0h91458099332.jpg' /><br>SRAM<br /> <ol> <li> 16Mx32, 32Mx16, 64Mx8 512Mb SDRAM </li> <li> Description: ISSI's 512Mb Synchronous DRAM achieves high-speed data transfer using pipeline architecture. </li> <li> Features: <ul> <li> Clock frequency: 200, 166, 143 MHz </li> <li> Fully synchronous; all signals referenced to a positive clock edge </li> <li> Internal bank for hiding row access/precharge </li> <li> Power supply: Vdd/Vddq = 2.3V-3.6V </li> <li> IS42/45SxxxxxD - Vdd/Vddq = 3.3V </li> <li> IS42/45RxxxxxD - Vdd/Vddq = 2.5 </li> <li> LVTTL interface </li> <li> Programmable burst length – (1, 2, 4, 8, full page) </li> <li> Programmable burst sequence: Sequential/Interleave </li> <li> Auto Refresh (CBR) Self Refresh </li> <li> 8K refresh cycles every 64 ms </li> <li> Random column address every clock cycle </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/synchronous-dram.html Synchronous DRAM http://www.icchips.org/productpic/ps_q0h91458099332.jpg http://www.icchips.org/synchronous-dram.html Dynamic Random Access Memory <img src='productpic/ps_lvw81458099365.jpg' /><br>SRAM<br /> <ol> <li> 16M x 8, 8M x16 128Mb SYNCHRONOUS DRAM </li> <li> Description: ISSI's 128Mb Synchronous DRAM achieves high-speed data transfer using pipeline architecture. </li> <li> Features: <br /> The 128Mb SDRAM is a high speed CMOS, dynamic random-access memory designed to operate in 3.3V Vdd and 3.3V Vddq memory systems containing 134,217,728 bits. Internally configured as a quad-bank DRAM with a synchronous interface. <br /> Each 33,554,432-bit bank is organized as 4,096 rows by 512 columns by 16 bits or 4,096 rows by 1,024 columns by 8 bits. The 128MbSDRAM includes anAUTOREFRESH MODE, and a power-saving, power-down mode. <br /> All signals are registered on the positive edge of the clock signal, CLK. All inputs and outputs are LVTTL compatible. </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/dynamic-random-access-memory.html Dynamic Random Access Memory http://www.icchips.org/productpic/ps_lvw81458099365.jpg http://www.icchips.org/dynamic-random-access-memory.html 128mb SDRAM <img src='productpic/ps_rz2b1458099386.jpg' /><br>SRAM<br /> <ol> <li> 32Meg x 8, 16Meg x16 256-MBIT SYNCHRONOUS DRAM </li> <li> Description: ISSI's 256Mb Synchronous DRAM achieves high-speed data transfer using pipeline architecture. </li> <li> Features: <br /> The 256MbSDRAM includes anAUTOREFRESH MODE, and a power-saving, power-down mode. <br /> All signals are registered on the positive edge of the clock signal, CLK. <br /> All inputs and outputs are LVTTL compatible. <br /> The 256Mb SDRAM has the ability to synchronously burst data at a high data rate with automatic column-address generation, the ability to interleave between internal banks to hide precharge time and the capability to randomly change column addresses on each clock cycle during burst access. </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/128mb-sdram.html 128mb SDRAM http://www.icchips.org/productpic/ps_rz2b1458099386.jpg http://www.icchips.org/128mb-sdram.html Complex Programmable Logic Device <img src='productpic/ps_8qvf1458098225.jpg' /><br>CPLD<br /> <ol> <li> The MAX® II family of instant-on, non-volatile CPLDs </li> <li> Description: The MAX® II family of instant-on, non-volatile CPLDs is based on a 0.18-µm, 6-layer-metal-flash process, with densities from 240 to 2,210 logic elements (LEs) (128 to 2,210 equivalent macrocells) and non-volatile storage of 8 Kbits. </li> <li> Features: <ul> <li> Low-cost, low-power CPLD </li> <li> Instant-on, non-volatile architecture </li> <li> Standby current as low as 25 µA </li> <li> Provides fast propagation delay and clock-to-output times </li> <li> Provides four global clocks with two clocks available per logic array block (LAB) </li> <li> UFM block up to 8 Kbits for non-volatile storage </li> <li> MultiVolt core enabling external supply voltages to the device of either 3.3 V/2.5 V or 1.8 V </li> <li> MultiVolt I/O interface supporting 3.3-V, 2.5-V, 1.8-V, and 1.5-V logic levels </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/complex-programmable-logic-device.html Complex Programmable Logic Device http://www.icchips.org/productpic/ps_8qvf1458098225.jpg http://www.icchips.org/complex-programmable-logic-device.html Complex Programmable Logic Devices <img src='productpic/ps_mfnd1458098259.jpg' /><br>CPLD<br /> <ol> <li> The MAX® II family of instant-on, non-volatile CPLDs </li> <li> Description: MAX II devices offer high I/O counts, fast performance, and reliable fitting versus other CPLD architectures. Featuring MultiVolt core, a user flash memory (UFM) block, and enhanced in-system programmability (ISP). </li> <li> Features: <ul> <li> Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors </li> <li> Schmitt triggers enabling noise tolerant inputs (programmable per pin) </li> <li> I/Os are fully compliant with the Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI </li> <li> Local Bus Specification, Revision 2.2 for 3.3-V operation at 66 MHz </li> <li> Supports hot-socketing </li> <li> Built-in Joint Test Action Group (JTAG) boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1-1990 </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/complex-programmable-logic-devices.html Complex Programmable Logic Devices http://www.icchips.org/productpic/ps_mfnd1458098259.jpg http://www.icchips.org/complex-programmable-logic-devices.html Field Programmable Gate Array <img src='productpic/ps_nfof1458098276.jpg' /><br>FPGA<br /> <ol> <li> FPGAs </li> <li> Description: <br /> When Cyclone III devices are implemented in a system, they are rated according to a set of defined parameters. To maintain the highest possible performance and reliability of Cyclone III devices, system designers must consider the operating requirements in this document. <br /> Cyclone III devices are offered in commercial, industrial, and automotive grades. Commercial devices are offered in –6 (fastest), –7, and –8 speed grades. <br /> Industrial and automotive devices are offered only in –7 speed grade. </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/field-programmable-gate-array.html Field Programmable Gate Array http://www.icchips.org/productpic/ps_nfof1458098276.jpg http://www.icchips.org/field-programmable-gate-array.html Field Programmable Gate Arrays <img src='productpic/ps_x9we1458098296.jpg' /><br>FPGA<br /> <ol> <li> Cyclone II FPGAs </li> <li> Description: <br /> Like Altera's highly successful first-generation 130-nm Cyclone® FPGA family, 90-nm Cyclone II FPGAs are built from the ground up for low cost and to provide a customer-defined feature set for high-volume, cost-sensitive applications. Cyclone II FPGAs deliver high performance and low power consumption at a cost that rivals that of ASICs. <br /> Cyclone II FPGAs are supported by the easy-to-use and free Quartus® II Web Edition design software (no license required), a broad catalog of intellectual property (IP), and hardware development kits to enable rapid development of low-cost FPGA solutions. </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/field-programmable-gate-arrays.html Field Programmable Gate Arrays http://www.icchips.org/productpic/ps_x9we1458098296.jpg http://www.icchips.org/field-programmable-gate-arrays.html Cyclone FPGA <img src='productpic/ps_dkr1458098322.jpg' /><br>FPGA<br /> <ol> <li> Cyclone FPGA &nbsp; </li> <li> Description: The Cyclone® field programmable gate array family is based on a 1.5-V, 0.13-μm, all-layer copper SRAM process. </li> <li> Features: <ul> <li> 2,910 to 20,060 LEs, see Table 1–1 </li> <li> Up to 294,912 RAM bits (36,864 bytes) </li> <li> Supports configuration through low-cost serial configuration device </li> <li> Support for LVTTL, LVCMOS, SSTL-2, and SSTL-3 I/O standards </li> <li> Support for 66- and 33-MHz, 64- and 32-bit PCI standard </li> <li> High-speed (640 Mbps) LVDS I/O support </li> <li> Low-speed (311 Mbps) LVDS I/O support </li> <li> 311-Mbps RSDS I/O support </li> <li> Up to two PLLs per device provide clock multiplication and phase shifting </li> <li> Up to eight global clock lines with six clock resources available per logic array block (LAB) row <br /> </li> <li> Support for external memory, including DDR SDRAM (133 MHz), FCRAM, and single data rate (SDR) SDRAM </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cyclone-fpga.html Cyclone FPGA http://www.icchips.org/productpic/ps_dkr1458098322.jpg http://www.icchips.org/cyclone-fpga.html Altera CPLD <img src='productpic/ps_jdo71458098344.jpg' /><br>CPLD<br /> <ol> <li> Programmable Logic Device Family </li> <li> Description: The MAX 7000 family of high-density, high-performance PLDs is based on Altera’s second-generation MAX architecture. </li> <li> Features: <ul> <li> High-performance, EEPROM-based programmable logic devices (PLDs) based on second-generation MAX® architecture </li> <li> 5.0-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface available in MAX 7000S devices – ISP circuitry compatible with IEEE Std. 1532 </li> <li> Includes 5.0-V MAX 7000 devices and 5.0-V ISP-based MAX 7000S devices </li> <li> Built-in JTAG boundary-scan test (BST) circuitry in MAX7000S devices with 128 or more macrocells </li> <li> Complete EPLD family with logic densities ranging from 600 to 5,000 usable gates (see Tables 1 and 2) </li> <li> 5-ns pin-to-pin logic delays with up to 175.4-MHz counter frequencies (including interconnect) </li> <li> PCI-compliant devices available </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/altera-cpld.html Altera CPLD http://www.icchips.org/productpic/ps_jdo71458098344.jpg http://www.icchips.org/altera-cpld.html Programmable Logic Devices <img src='productpic/ps_7wwl1458098361.jpg' /><br>CPLD<br /> <ol> <li> Programmable Logic Device Family </li> <li> Description: MAX 7000A (including MAX 7000AE) devices are high-density, highperformance devices based on Altera’s second-generation MAX architecture. </li> <li> Features: <ul> <li> Built-in boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1 </li> <li> Supports JEDEC Jam Standard Test and Programming Language (STAPL) JESD-71 </li> <li> Enhanced ISP features </li> – Enhanced ISP algorithm for faster programming (excluding EPM7128A and EPM7256A devices)<br /> – ISP_Done bit to ensure complete programming (excluding EPM7128A and EPM7256A devices)<br /> – Pull-up resistor on I/O pins during in-system programming <li> Pin-compatible with the popular 5.0-V MAX 7000S devices </li> <li> High-density PLDs ranging from 600 to 10,000 usable gates </li> <li> Extended temperature range </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/programmable-logic-devices.html Programmable Logic Devices http://www.icchips.org/productpic/ps_7wwl1458098361.jpg http://www.icchips.org/programmable-logic-devices.html FPGA IC <img src='productpic/ps_dzys1458098387.jpg' /><br>FPGA<br /> <ol> <li> Cyclone FPGA Family </li> <li> Description: The Cyclone® field programmable gate array family is based on a 1.5-V, 0.13-μm, all-layer copper SRAM process, with densities up to 20,060 logic elements (LEs) and up to 288 Kbits of RAM. With features like phase-locked loops (PLLs) for clocking and a dedicated double data rate (DDR) interface to meet DDR SDRAM and fast cycle RAM (FCRAM) memory requirements, Cyclone devices are a cost-effective solution for data-path applications. Cyclone devices support various I/O standards, including LVDS at data rates up to 640 megabits per second (Mbps), and 66- and 33-MHz, 64- and 32-bit peripheral component interconnect (PCI), for interfacing with and supporting ASSP and ASIC devices. Altera also offers new low-cost serial configuration devices to configure Cyclone devices. </li> <li> Features: <ul> <li> Support for external memory, including DDR SDRAM (133 MHz), FCRAM, and single data rate (SDR) SDRAM </li> <li> Support for multiple intellectual property (IP) cores, including Altera® MegaCore® functions and Altera Megafunctions Partners Program (AMPPSM) megafunctions. </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/fpga-ic.html FPGA IC http://www.icchips.org/productpic/ps_dzys1458098387.jpg http://www.icchips.org/fpga-ic.html CPLD IC <img src='productpic/ps_2yu21458098404.jpg' /><br>FPGA<br /> <ol> <li> Cyclone FPGA Family </li> <li> Description: Stratix II GX devices include 4 to 20 high-speed transceiver channels, each incorporating clock and data recovery unit (CRU) technology and embedded SERDES capability at data rates of up to 6.375 gigabits per second (Gbps). </li> <li> Features: <blockquote> ■ Main device features: </blockquote> <ul> <li> TriMatrix memory consisting of three RAM block sizes to implement true dual-port memory and first-in first-out (FIFO) buffers with performance up to 550 MHz </li> <li> Up to 16 global clock networks with up to 32 regional clock networks per device region </li> <li> High-speed DSP blocks provide dedicated implementation of multipliers (at up to 450 MHz), multiply-accumulate functions, and finite impulse response (FIR) filters </li> <li> Up to four enhanced PLLs per device provide spread spectrum, programmable bandwidth, clock switch-over, real-time PLL reconfiguration, and advanced multiplication and phase shifting </li> <li> Support for numerous single-ended and differential I/O standards </li> <li> High-speed source-synchronous differential I/O support on up to 71 channels. </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/cpld-ic.html CPLD IC http://www.icchips.org/productpic/ps_2yu21458098404.jpg http://www.icchips.org/cpld-ic.html Altera IC <img src='productpic/ps_r8ir1458098423.jpg' /><br>CPLD<br /> <ol> <li> Programmable Logic Device Family </li> <li> Description: The EEPROM-based MAX 7000 family provides 600 to 5,000 usable gates, ISP, pin-to-pin delays as fast as 5 ns, and counter speeds of up to 175.4 MHz.. </li> <li> Features: <ul> <li> Open-drain output option in MAX 7000S devices </li> <li> Programmable macrocell flipflops with individual clear, preset, clock, and clock enable controls </li> <li> Programmable power-saving mode for a reduction of over 50% in each macrocell </li> <li> Configurable expander product-term distribution, allowing up to 32 product terms per macrocell </li> <li> 44 to 208 pins available in plastic J-lead chip carrier (PLCC), ceramic pin-grid array (PGA), plastic quad flat pack (PQFP), power quad flat pack (RQFP), and 1.0-mm thin quad flat pack (TQFP) packages </li> <li> Programmable security bit for protection of proprietary designs </li> <li> 3.3-V or 5.0-V operation – MultiVoltTM I/O interface operation, allowing devices to interface with 3.3-V or 5.0-V devices (MultiVolt I/O operation is not available in 44-pin packages) </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/altera-ic.html Altera IC http://www.icchips.org/productpic/ps_r8ir1458098423.jpg http://www.icchips.org/altera-ic.html Stratix II FPGA <img src='productpic/ps_cav81458098443.jpg' /><br>FPGA <ol> <li> Stratix II FPGA Family </li> <li> Description: All Stratix II GX devices support vertical migration within the same package. </li> <li> Features: <ul> <li> High-speed serial transceiver channels with clock data recovery (CDR) provide 600-megabits per second (Mbps) to 6.375-Gbps full-duplex transceiver operation per channel </li> <li> Devices available with 4, 8, 12, 16, or 20 high-speed serial transceiver channels providing up to 255 Gbps of serial bandwidth (full duplex) </li> <li> Dynamically programmable voltage output differential (VOD) and pre-emphasis settings for improved signal integrity </li> <li> Support for CDR-based serial protocols, including PCI Express, Gigabit Ethernet, SDI, Altera’s SerialLite II, XAUI, CEI-6G, CPRI, Serial RapidIO, SONET/SDH </li> <li> Dynamic reconfiguration of transceiver channels to switch between multiple protocols and data rates </li> <li> Individual transmitter and receiver channel power-down capability for reduced power consumption during non-operation </li> <li> Adaptive equalization (AEQ) capability at the receiver to compensate for changing link characteristics. </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/stratix-ii-fpga.html Stratix II FPGA http://www.icchips.org/productpic/ps_cav81458098443.jpg http://www.icchips.org/stratix-ii-fpga.html Advanced FPGA <img src='productpic/ps_2aa41458100743.jpg' /><br>FPGA<br /> <ol> <li> DC and AC Switching Characteristics </li> <li> Description:&nbsp; Kintex®-7 FPGAs are available in -3, -2, -1, -1L, and -2L speed grades, with -3 having the highest performance. </li> <li> Features: <ul> <li> Advanced high-performance FPGA logic based on real 6-input lookup table (LUT) technology configurable as distributed memory. </li> <li> 36 Kb dual-port block RAM with built-in FIFO logic for on-chip data buffering. </li> <li> High-performance SelectIO™ technology with support for DDR3 interfaces up to 1,866 Mb/s. </li> <li> High-speed serial connectivity with built-in multi-gigabit transceivers from 600 Mb/s to maximum rates of 6.6 Gb/s up to 28.05 Gb/s, offering a special low-power mode, optimized for chip-to-chip interfaces. </li> <li> A user configurable analog interface (XADC), incorporating dual 12-bit 1MSPS analog-to-digital converters with on-chip thermal and supply sensors. </li> <li> DSP slices with 25 x 18 multiplier, 48-bit accumulator, and pre-adder for high-performance filtering, including optimized symmetric coefficient filtering. </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/advanced-fpga.html Advanced FPGA http://www.icchips.org/productpic/ps_2aa41458100743.jpg http://www.icchips.org/advanced-fpga.html Spartan-3A FPGA <img src='productpic/ps_4tym1458100761.jpg' /><br>FPGA<br /> <ol> <li> Spartan-3A FPGA Family </li> <li> Description: The Spartan®-3A family of Field-Programmable Gate Arrays (FPGAs) solves the design challenges in most high-volume, cost-sensitive, I/O-intensive electronic applications. </li> <li> Features: <ul> <li> Very low cost, high-performance logic solution for high-volume, cost-conscious applications </li> <li> Dual-range VCCAUX supply simplifies 3.3V-only design </li> <li> Suspend, Hibernate modes reduce system power </li> <li> Multi-voltage, multi-standard SelectIO™ interface pins </li> <li> Up to 502 I/O pins or 227 differential signal pairs </li> <li> LVCMOS, LVTTL, HSTL, and SSTL single-ended I/O </li> <li> 3.3V, 2.5V, 1.8V, 1.5V, and 1.2V signaling </li> <li> Selectable output drive, up to 24 mA per pin </li> <li> QUIETIO standard reduces I/O switching noise Full 3.3V ± 10% compatibility and hot swap compliance </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/spartan3a-fpga.html Spartan-3A FPGA http://www.icchips.org/productpic/ps_4tym1458100761.jpg http://www.icchips.org/spartan3a-fpga.html Xilinx 7 Series FPGA <img src='productpic/ps_v69z1458100777.jpg' /><br>FPGA<br /> <ol> <li> 7 Series FPGAs </li> <li> Description: Xilinx® 7 series FPGAs comprise three new FPGA families that address the complete range of system requirements, ranging from low cost, small form factor, cost-sensitive, high-volume applications to ultra high-end connectivity bandwidth, logic capacity, and signal processing capability for the most demanding high-performance applications. </li> <li> Features: <ul> <li> Powerful clock management tiles (CMT), combining phase-locked loop (PLL) and mixed-mode clock manager (MMCM) blocks for high precision and low jitter. </li> <li> Integrated block for PCI Express® (PCIe), for up to x8 Gen3 Endpoint and Root Port designs. </li> <li> Wide variety of configuration options, including support for commodity memories, 256-bit AES encryption with HMAC/SHA-256 authentication, and built-in SEU detection and correction. </li> <li> Low-cost, wire-bond, lidless flip-chip, and high signal integrity flipchip packaging offering easy migration between family members in the same package. All packages available in Pb-free and selected packages in Pb option. </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/xilinx-7-series-fpga.html Xilinx 7 Series FPGA http://www.icchips.org/productpic/ps_v69z1458100777.jpg http://www.icchips.org/xilinx-7-series-fpga.html Spartan II FPGA <img src='productpic/ps_2etx1458100794.jpg' /><br>FPGA<br /> <br /> <ol> <li> Spartan-II FPGA Family </li> <li> Description:&nbsp; The Spartan®-II Field-Programmable Gate Array family gives users high performance, abundant logic resources, and a rich feature set, all at an exceptionally low price. </li> <li> Features: <ul> <li> Second generation ASIC replacement technology <br /> - Densities as high as 5,292 logic cells with up to 200,000 system gates <br /> - Streamlined features based on Virtex® FPGA architecture <br /> - Unlimited reprogrammability <br /> - Very low cost <br /> - Cost-effective 0.18 micron process </li> <li> System level features - SelectRAM™ hierarchical memory: <br /> - 16 bits/LUT distributed RAM <br /> - Configurable 4K bit block RAM <br /> - Fast interfaces to external RAM <br /> - Fully PCI compliant <br /> - Low-power segmented routing architecture </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/spartan-ii-fpga.html Spartan II FPGA http://www.icchips.org/productpic/ps_2etx1458100794.jpg http://www.icchips.org/spartan-ii-fpga.html Spartan 3E FPGA <img src='productpic/ps_lv9p1458100813.jpg' /><br>FPGA<br /> <ol> <li> Spartan-3E FPGA Family </li> <li> Description: The Spartan®-3E family of Field-Programmable Gate Arrays (FPGAs) is specifically designed to meet the needs of high volume, cost-sensitive consumer electronic applications. </li> <li> Features: <ul> <li> Very low cost, high-performance logic solution for high-volume, consumer-oriented applications </li> <li> Proven advanced 90-nanometer process technology </li> <li> Multi-voltage, multi-standard SelectIO™ interface pins </li> <li> Up to 376 I/O pins or 156 differential signal pairs. </li> <li> LVCMOS, LVTTL, HSTL, and SSTL single-ended signal standards </li> <li> 3.3V, 2.5V, 1.8V, 1.5V, and 1.2V signaling 622+ Mb/s data transfer rate per I/O </li> <li> True LVDS, RSDS, mini-LVDS, differential HSTL/SSTL differential I/O </li> <li> Enhanced Double Data Rate (DDR) support DDR SDRAM support up to 333 Mb/s </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/spartan-3e-fpga.html Spartan 3E FPGA http://www.icchips.org/productpic/ps_lv9p1458100813.jpg http://www.icchips.org/spartan-3e-fpga.html Spartan 3AN FPGA <img src='productpic/ps_ht5b1458100829.jpg' /><br>FPGA<br /> <ol> <li> Spartan-3AN FPGA Family </li> <li> Description: The Spartan®-3AN FPGA family combines the best attributes of a leading edge, low cost FPGA with nonvolatile technology across a broad range of densities. </li> <li> Features: <ul> <li> The new standard for low cost nonvolatile FPGA solutions </li> <li> Eliminates traditional nonvolatile FPGA limitations with the advanced 90 nm Spartan-3A device feature set </li> <li> Memory, multipliers, DCMs, SelectIO, hot swap, power management, etc. </li> <li> Integrated robust configuration memory </li> <li> Saves board space </li> <li> Improves ease-of-use </li> <li> Simplifies design </li> <li> Reduces support issues </li> <li> Plentiful amounts of nonvolatile memory available to the user </li> <li> Up to 11+ Mb available </li> <li> MultiBoot support </li> <li> Embedded processing and code shadowing </li> <li> Scratchpad memory </li> <li> Robust 100K Flash memory program/erase cycles </li> <li> 20 years Flash memory data retention </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/spartan-3an-fpga.html Spartan 3AN FPGA http://www.icchips.org/productpic/ps_ht5b1458100829.jpg http://www.icchips.org/spartan-3an-fpga.html Spartan 6 FPGA <img src='productpic/ps_e4we1458100845.jpg' /><br>FPGA<br /> <ol> <li> Spartan-6 FPGA </li> <li> Description: The Spartan®-6 family provides leading system integration capabilities with the lowest total cost for high-volume applications. </li> <li> Features: <ul> <li> Spartan-6 Family: </li> <li> Spartan-6 LX FPGA: Logic optimized </li> <li> Spartan-6 LXT FPGA: High-speed serial connectivity </li> <li> Designed for low cost </li> <li> Multiple efficient integrated blocks </li> <li> Optimized selection of I/O standards </li> <li> Staggered pads </li> <li> High-volume plastic wire-bonded packages </li> <li> Low static and dynamic power </li> <li> 45 nm process optimized for cost and low power </li> <li> Hibernate power-down mode for zero power </li> <li> Suspend mode maintains state and configuration with multi-pin wake-up, control enhancement </li> <li> Lower-power 1.0V core voltage (LX FPGAs, -1L only) </li> <li> High performance 1.2V core voltage (LX and LXT FPGAs, -2, -3, and -3N speed grades) </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/spartan-6-fpga.html Spartan 6 FPGA http://www.icchips.org/productpic/ps_e4we1458100845.jpg http://www.icchips.org/spartan-6-fpga.html Spartan FPGA <img src='productpic/ps_o6ht1458100862.jpg' /><br>FPGA<br /> <ol> <li> Spartan-6 FPGA </li> <li> Description: The thirteen-member family delivers expanded densities ranging from 3,840 to 147,443 logic cells, with half the power consumption of previous Spartan families, and faster, more comprehensive connectivity. Built on a mature 45 nm low-power copper process technology that delivers the optimal balance of cost, power, and performance. </li> <li> Features: <ul> <li> Multi-voltage, multi-standard SelectIO™ interface banks </li> <li> Up to 1,080 Mb/s data transfer rate per differential I/O </li> <li> Selectable output drive, up to 24 mA per pin </li> <li> 3.3V to 1.2V I/O standards and protocols </li> <li> Low-cost HSTL and SSTL memory interfaces </li> <li> Hot swap compliance </li> <li> Adjustable I/O slew rates to improve signal integrity. </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/spartan-fpga.html Spartan FPGA http://www.icchips.org/productpic/ps_o6ht1458100862.jpg http://www.icchips.org/spartan-fpga.html Xilinx CPLD <img src='productpic/ps_24lu1458100876.jpg' /><br>CPLD<br /> <ol> <li> High Performance CPLD &nbsp; </li> <li> Description:&nbsp; The XC95288XL is a 3.3V CPLD targeted for high-performance, low-voltage applications in leading-edge communi cations and computing systems . </li> <li> Features: <ul> <li> 6 ns pin-to-pin logic delays </li> <li> System frequency up to 208 MHz </li> <li> 288 macrocells with 6,400 usable gates </li> <li> Available in small footprint packages <br /> - 144-pin TQFP (117 user I/O pins) <br /> - 208-pin PQFP (168 user I/O pins) <br /> - 256-pin BGA (192 user I/O pins) <br /> - 256-pin FBGA (192 user I/O pins) <br /> - 280-pin CSP (192 user I/O pins) <br /> - Pb-free available for all packages </li> <li> Optimized for high-performance 3.3V systems <br /> - Low power operation <br /> - 5V tolerant I/O pins accept 5V, 3.3V, and 2.5V signals <br /> - 3.3V or 2.5V output capability </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/xilinx-cpld.html Xilinx CPLD http://www.icchips.org/productpic/ps_24lu1458100876.jpg http://www.icchips.org/xilinx-cpld.html Xilinx IC <img src='productpic/ps_jqt21458100889.jpg' /><br>CPLD<br /> <ol> <li> High Performance CPLD </li> <li> Description: The XC95288XL is a 3.3V CPLD targeted for high-performance, comprised of 16 54V18 Function Blocks, providing 6,400 usable gates with propagation delays of 6 ns.. </li> <li> Features: <ul> <li> Advanced system features <br /> - In-system programmable - Superior pin-locking and routability with Fast CONNECT™ II switch matrix <br /> - Extra wide 54-input Function Blocks <br /> - Up to 90 product-terms per macrocell with individual product-term allocation <br /> - Local clock inversion with three global and one product-term clocks <br /> - Individual output enable per output pin with local inversion <br /> - Input hysteresis on all user and boundary-scan pin inputs. </li> </ul> </li> <li> Delivery time: 5-7days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/xilinx-ic.html Xilinx IC http://www.icchips.org/productpic/ps_jqt21458100889.jpg http://www.icchips.org/xilinx-ic.html Nanya SDRAM <img src='productpic/ps_2yka1458100249.jpg' /><br>SDRAM<br /> <ol> <li> Commercial, Industrial and Automotive DDR2 1Gb SDRAM </li> <li> Features: <ul> <li> JEDEC DDR2 Compliant <br /> - Double-data rate on DQs, DQS, DM bus <br /> - 4n Prefetch Architecture </li> <li> Throughput of valid Commands <br /> - Posted CAS and Additive Latency (AL) </li> <li> Signal Integrity <br /> - Configurable DS for system compatibility <br /> - Configurable On-Die Termination </li> <li> Data Integrity - Auto Refresh and Self Refresh Modes </li> <li> Power Saving Modes <br /> - Power Down Mode <br /> - Partial Array Self Refresh (PASR) </li> <li> SSTL_18 compliance and Power Supply <br /> - VDD/VDDQ = 1.70 to 1.90V </li> </ul> </li> <li> Delivery time: 7-10days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/nanya-sdram.html Nanya SDRAM http://www.icchips.org/productpic/ps_2yka1458100249.jpg http://www.icchips.org/nanya-sdram.html DDR3 SDRAM <img src='productpic/ps_l301458179212.jpg' /><br>SDRAM<br /> <ol> <li> DDR3(L) 4Gb SDRAM </li> <li> Features: <ul> <li> JEDEC DDR3 Compliant <br /> - 8n Prefetch Architecture <br /> - Differential Clock(CK/ CK) and Data Strobe(DQS/ DQS) <br /> - Double-data rate on DQs, DQS and DM </li> <li> Data Integrity <br /> - Auto Self Refresh (ASR) by DRAM built-in TS <br /> - Auto Refresh and Self Refresh Modes </li> <li> Power Saving Mode <br /> - Partial Array Self Refresh (PASR)1 <br /> - Power Down Mode </li> <li> Signal Integrity <br /> - Configurable DS for system compatibility <br /> - Configurable On-Die Termination <br /> - ZQ Calibration for DS/ODT impedance accuracy via external ZQ pad (240 ohm ± 1%) </li> <li> Signal Synchronization <br /> - Write Leveling via MR settings 7 <br /> - Read Leveling via MPR </li> </ul> </li> <li> Delivery time: 7-10days from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/ddr3-sdram.html DDR3 SDRAM http://www.icchips.org/productpic/ps_l301458179212.jpg http://www.icchips.org/ddr3-sdram.html DDR3L SDRAM <img src='productpic/ps_3x11458100323.jpg' /><br>SDRAM<br /> <ol> <li> DDR3(L) 4Gb SDRAM </li> <li> Features: <ul> <li> CAS Latency (5/6/7/8/9/10/11/12/13/14) </li> <li> CAS Write Latency (5/6/7/8/9/10) </li> <li> Additive Latency (0/CL-1/CL-2) </li> <li> Write Recovery Time (5/6/7/8/10/12/14/16) </li> <li> Burst Type (Sequential/Interleaved) </li> <li> Burst Length (BL8/BC4/BC4 or 8 on the fly) </li> <li> Self RefreshTemperature Range(Normal/Extended) </li> <li> Output Driver Impedance (34/40) </li> <li> On-Die Termination of Rtt_Nom(20/30/40/60/120) </li> <li> On-Die Termination of Rtt_WR(60/120) </li> <li> Precharge Power Down (slow/fast) </li> </ul> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/ddr3l-sdram.html DDR3L SDRAM http://www.icchips.org/productpic/ps_3x11458100323.jpg http://www.icchips.org/ddr3l-sdram.html 1Gb DDR2 SDRAM <img src='productpic/ps_oohs1458100346.jpg' /><br>SDRAM<br /> <ol> <li> 1Gb DDR2 SDRAM </li> <li> Description: The 1giga bit (1Gb) Double-Data-Rate-2 (DDR2) DRAMs is a high-speed CMOS Double Data Rate 2 SDRAM containing 1,073,741,824 bits. It is internally configured as an octal-bank DRAM. <br /> The 1Gb chip is organized as 32Mbit x 4 I/O x 8 bank, 16Mbit x 8 I/O x 8 bank or 8Mbit x 16 I/O x 8 bank device. These synchronous devices achieve high speed double-data-rate transfer rates of up to 1066 Mb/sec/pin for general applications. <br /> The chip is designed to comply with all key DDR2 DRAM key features: <blockquote> (1) posted CAS with additive latency <br /> (2) write latency = read latency -1 <br /> (3) normal and weak strength data-output driver <br /> (4) variable data-output impedance adjustment and <br /> (5) an ODT (On-Die Termination) function. </blockquote> </li> <li> Delivery time: 2WEEKS from distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/1gb-ddr2-sdram.html 1Gb DDR2 SDRAM http://www.icchips.org/productpic/ps_oohs1458100346.jpg http://www.icchips.org/1gb-ddr2-sdram.html HIROSE Connectors <img src='productpic/ps_izib1458098528.jpg' /><br><ol> <li> SD Memory Card Connectors </li> <li> Features: <blockquote> 1.Withstands higher force of card insertion<br /> -Metal cover extends over back of the connector allowing it to withstand force of up to 400N(static load) when dropped or accidentally hit. <br /> 2.No damage to the card when accidentally pulled out <br /> -The connectors will release the card when a moderate pull-out force of about 4N is applied. There will be no damage to the lock components and all connector functions will not be affected. <br /> 3. Accidental card fall-out prevention <br /> -Built-in Iock feature holds the card securely in place. <br /> 4.Reliable Card insertion and Withdrawal <br /> -Built-in Push-in / Push-out ejection mechanism assures simple and reliable card insertion and withdrawal. <br /> 5.Designed to accept Secure Digital I/O card (Built-in Ground Contact) <br /> -The connector allows use of various expansion modules, including the Bluetooth communication modules. </blockquote> </li> <li> Delivery time: Need to reconfirm with distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/hirose-connectors.html HIROSE Connectors http://www.icchips.org/productpic/ps_izib1458098528.jpg http://www.icchips.org/hirose-connectors.html Crimping Connector <img src='productpic/ps_68i1458098546.jpg' /><br><ol> <li> 1.25mm Pitch Miniature Crimping Connector </li> <li> Features: <blockquote> 1. Miniature Size <br /> -Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type) (For DIP type, the mounting height is to 5.3mm to the straight and 3.6mm at the right angle) <br /> 2. Multi-contact <br /> -The double row type achieves the multi-contact up to 40 contacts, and secures 30% higher density in the mounting area, compared with the single row type. <br /> 3. Correspond to Automatic Mounting <br /> -The header provides the grade with the vacuum absorption area, and secures automatic mounting by the embossed tape packaging. In addition, the tube packaging can be selected. <br /> 4. Integral Basic Function Despite Miniature Size <br /> -The header is designed in a scoop-proof box structure, and completely prevents mis-insertion. In addition, the surface mounting (SMT) header is equipped with the metal fitting to prevent solder peeling. </blockquote> </li> <li> Delivery time: Need to reconfirm with distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/crimping-connector.html Crimping Connector http://www.icchips.org/productpic/ps_68i1458098546.jpg http://www.icchips.org/crimping-connector.html Stacking Connector <img src='productpic/ps_zsr1458098562.jpg' /><br><ol> <li> 0.8mm Pitch Stacking Height 5 to 9mm Connector </li> <li> Features: <blockquote> 1. Stacking Height 5 to 9mm <br /> -The board to board stacking height can be set at every millimeter between 5 and 9mm. <br /> 2. Effective Contact Length 1.7mm <br /> -Despite the low profile type connector, the connector has the 1.7mm long effective contact length and provides a margin sufficient to contact. <br /> 3. Mating Guide <br /> -The self-alignment for mating action exhibits a high guide level at ± 1mm, and makes the mating process easier by providing the guide rib. <br /> 4. Automatic Mounting <br /> -The standard packaging specification specifies the stick package, considering the automatic mount, while the emboss package can also correspond to the connector with less than 80 contacts. (However, the product is limited to 80 contacts.) <br /> 5. SMT Coplanarity<br /> -The lead coplanarity on the SMT soldered are </blockquote> </li> <li> Delivery time:&nbsp; Need to reconfirm with distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/stacking-connector.html Stacking Connector http://www.icchips.org/productpic/ps_zsr1458098562.jpg http://www.icchips.org/stacking-connector.html Stacking Connectors <img src='productpic/ps_xarv1458098588.jpg' /><br><ol> <li> High-Speed (3.125Gbps) Stacking Connectors </li> <li> Features: <ul> <li> 0.6mm Pitch </li> <li> Stacking Height: 5~16mm </li> <li> Number of Contacts: 60, 80, 100, 120, 140, 160, 200, 240, 280 </li> <li> SMT Coplanarity <br /> -The coplanarity of the SMT solder area lead is maintained at the high accuracy of less than 0.1mm. </li> <li> Mating Guide <br /> -The very small and guide rib is provided, and secures ±0.6mm self-alignment, considering the mating operativity into accounts. </li> <li> Effective Mating Length: 2mm </li> <li> Mis-insertion Prevention <br /> -The boss prevents mis-insertion in the board to cause due to the boss position and boss diameter. </li> </ul> </li> <li> Delivery time: Need to reconfirm with distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/stacking-connectors.html Stacking Connectors http://www.icchips.org/productpic/ps_xarv1458098588.jpg http://www.icchips.org/stacking-connectors.html Dual Row Connector <img src='productpic/ps_1ebt1458098604.jpg' /><br><ol> <li> 2mm Double-Row Connector<br /> </li> <li> Features: <blockquote> 1.Space-saving on Board Realized <br /> Double rows of 2mm pitch contact has been condensed within the 5mmWidth. <br /> The multiple number of signals can be secured in the same <br /> space as the conventional 2mm single-row contact. <br /> 2.Broad Variation <br /> The insulation displacement and crimping methods are prepared for connection. Thus, board to cable, in-Iine, board to board connectors are provided in order to widen a board design variation. <br /> In addition,"Gold'' or "Tin" can be selected for the plating according application, while the SMT products line up. <br /> 3.Applicable Wire Covers Wide Range <br /> According to the double rows of 2mm pitch compact design, the applicable wire can cover AWG22 to 30. <br /> 4.The ID Type Connector Achieves Connection Work. <br /> Using the full automatic insulation displacement machine, the Complicated multi-harness can be easily connected,&nbsp; reducing the man-hour and eliminating the manual work process. </blockquote> </li> <li> Delivery time:&nbsp; Need to reconfirm with distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/dual-row-connector.html Dual Row Connector http://www.icchips.org/productpic/ps_1ebt1458098604.jpg http://www.icchips.org/dual-row-connector.html Crimp Connector <img src='productpic/ps_c23y1458098629.jpg' /><br><ol> <li> 1.25mm Pitch Miniature Crimping Connector </li> <li> Features: <blockquote> 1. Miniature Size <br /> Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type) <br /> (For DIP type, the mounting height is to 5.3mm to the straight and 3.6mm at the right angle) <br /> 2. Multi-contact <br /> The double row type achieves the multi-contact up to 40 contacts, and secures 30% higher density in the mounting area, compared with the single row type. <br /> 3. Applications: <br /> Note PC, mobile terminal, miniature type business equipment,&nbsp; and other various consumer equipment, including video camera </blockquote> </li> <li> Delivery time: Need to reconfirm with distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/crimp-connector.html Crimp Connector http://www.icchips.org/productpic/ps_c23y1458098629.jpg http://www.icchips.org/crimp-connector.html Board To Board Connector <img src='productpic/ps_cmxc1458098647.jpg' /><br><ol> <li> 1mm Pitch SMT Board to Board Connector &nbsp; </li> <li> Features: <ul> <li> Compliant with the VESA FPDI-1 Standard Interface Connector <br /> The 31 and 41 contact connectors comply with the standard connector specification for the flat panel display interface, which U.S VESA. Has selected as FPDI-1. </li> <li> Perfect Mis-insertion Prevention <br /> The mating area is designed in a trapezoidal structure, and perfectly prevents the mis-insertion despite the miniature size. </li> <li> Equipped with Easy Lock Mechanism <br /> The easy lock mechanism assures the firm insertion and extraction properties as well as the insertion/extraction feeling touch. </li> <li> Smooth Insertion and Extraction Feeling <br /> The contact is constructed without the material fragible surface in the contact portion, and provides a smooth insertion and use feeling. </li> </ul> </li> <li> Delivery time: Need to reconfirm with distributor </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/board-to-board-connector.html Board To Board Connector http://www.icchips.org/productpic/ps_cmxc1458098647.jpg http://www.icchips.org/board-to-board-connector.html Dual Row Header Connector <img src='productpic/ps_bdb61458098668.jpg' /><br><ol> <li> 2mm Double-Row Connector </li> <li> Features: <ul> <li> Space-saving on Board Realized <br /> Double rows of 2mm pitch contact has been condensed within the 5mmwidth. <br /> The multiple number of signals can be secured in the same space as the conventional 2mm single-row contact. </li> <li> Broad Variation <br /> The insulation displacement and crimping methods are prepared for connection. Thus, board to cable, in-line, board to board connectors are provided in order to widen a board design variation. <br /> In addition, "Gold" or "Tin" can be selected for the plating according application, while the SMT products line up. </li> <li> Applicable Wire Covers Wide Range <br /> According to the double rows of 2mm pitch compact design, the applicable wire can cover AWG22 to 30. </li> <li> The ID Type Connector Achieves Connection Work. <br /> Using the full automatic insulation displacement machine, the complicated multi-harness can be easily connected,&nbsp; reducing the man-hour and eliminating the manual work process. </li> </ul> </li> <li> Delivery time: Need to reconfirm with distributor<br /> </li> <li> Payment: T/T in advance </li> </ol> http://www.icchips.org/dual-row-header-connector.html Dual Row Header Connector http://www.icchips.org/productpic/ps_bdb61458098668.jpg http://www.icchips.org/dual-row-header-connector.html