TI IC



You are here: Home -> Products -> TI IC
We are a professional manufacturer TI IC manufacturer, supplier and exporter, factory in Taiwan.We can make new products to respond quickly to market changes and customer requirements. Our products are manufactured and tested to international standard, under strict supervision of highly qualified technocrats to satisfy and meet the most critical demand of reputed industrial user world wide.
  • IC DVR - MAX3232EIPWR
    MAX3232EIPWR : IC DVR
    IC RS232 LINE DVR/RCVR
    1. 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiver With ±15-kV IEC ESD Protection
    2. Description: The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND).
    3. Application:
      • Battery-Powered Systems
      • Notebooks
      • Laptops
      • Palmtop PCs
      • Hand-Held Equipment
      • Features: ESD Protection for RS-232 Bus Pins
      • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
      • Operates With 3-V to 5.5-V VCC Supply
      • Operates up to 250 kbit/s
      • Two Drivers and Two Receivers
      • Low Supply Current: 300 μA (Typical)
      • External Capacitors: 4 × 0.1 Μf
    4. Delivery time: Usually 5-7 days from distributor
    5. Payment: T/T in advance
  • Isolation Amplifier - ISO124P
    ISO124P : Isolation Amplifier
    1. Precision Lowest-Cost Isolation Amplifier
    2. Description: a precision isolation amplifier incorporating a novel duty cycle modulation-demodulation technique.
    3. Application:
      • Industrial Process Control:
      • Ground Loop Elimination
      • Motor and SCR Control
      • Power Monitoring
      • PC-Based Data Acquisition
      • Test Equipment
    4. Features:
      • 100% Tested for High-Voltage Breakdown
      • Rated 1500 Vrms
      • High IMR: 140 dB at 60 Hz
      • 0.010% Maximum Nonlinearity
      • Bipolar Operation: VO = ±10 V
      • DIP-16 and SO-28
      • Ease of Use: Fixed Unity Gain Configuration
      • ±4.5-V to ±18-V Supply Range
    5. Delivery time: Usually 5-7 days from distributor
    6. Payment: T/T in advance
  • Operational Amplifier - OPA2277PA
    OPA2277PA : Operational Amplifier
    1. High Precision Operational Amplifiers
    2. Description: The OPAx277 series precision operational amplifiers replace the industry standard OP-17
    3. Application:
      • Transducer Amplifiers
      • Bridge Amplifiers
      • Temperature Measurements
      • Strain Gage Amplifiers
      • Precision Integrators
      • Battery-Powered Instruments
      • Test Equipment
    4. Features:
      • Ultralow Offset Voltage: 10 Μv
      • Ultralow Drift: ±0.1 μV/°C
      • High Open-Loop Gain: 134 dB
      • High Common-Mode Rejection: 140 dB
      • High Power Supply Rejection: 130 dB
      • Low Bias Current: 1-nA maximum
      • Wide Supply Range: ±2 V to ±18 V
    5. Delivery time: Usually 5-7 days from distributor
    6. Payment: T/T in advance
  • Operational Amplifiers - TPS63060DSCR
    TPS63060DSCR : Operational Amplifiers
    1. High Input Voltage, Buck-Boost Converter With 2-A Switch Current
    2. Description: The TPS6306x devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery.
    3. Application:
      • Dual Li-Ion Application
      • DSCs and Camcorders
      • Notebook Computer
      • Industrial Metering Equipment
      • Ultra Mobile PCs and Mobile. Internet Devices
      • Personal Medical Products
      • High-Power LEDs
    4. Features:
      • Input Voltage Range: 2.5 V to 12 V
      • Efficiency: Up to 93%
      • Output Current at 5 V (VIN <10 V): 2 A in Buck Mode
      • Output Current at 5 V ( VIN >4 V): 1.3 A in Boost Mode
      • Automatic Transition Between Step Down and Boost Mode
    5. Delivery time: Usually 5-7 days from distributor
    6. Payment: T/T in advance
  • Amplifier IC - OPA2350EA/2K5
    OPA2350EA/2K5 : Amplifier IC
    Operational Amplifiers
    1. High-Speed, Single-Supply, Rail-to-Rail Operational Amplifiers MicroAmplifier Series
    2. Description: The OPA350 series of rail-to-rail CMOS operational amplifiers are optimized for low voltage, single-supply operation.
    3. Application:
      • Cell Phone PA Control Loops
      • Driving A/D Converters
      • Video Processing
      • Data Acquisition
      • Process Controls
      • Audio Processing
      • Communications
      • Active Filters
      • Test Equipment
    4. Features:
      • Rail-to-Rail Input
      • Rail-to-Rail Output (Within 10 mV)
      • Wide Bandwidth: 38 MHz
      • High Slew Rate: 22 V/μs
      • Low Noise: 5 nV/√Hz
      • Low THD+Noise: 0.0006%
      • Unity-Gain Stable
    5. Delivery time: Usually 5-7 days from distributor
    6. Payment: T/T in advance
  • Equalizer IC - LMH0044SQ/NOPB
    LMH0044SQ/NOPB : Equalizer IC
    Equalizer
    1. SMPTE 292M / 259M Adaptive Cable Equalizer
    2. Description: The LMH0044 SMPTE 292M / 259M adaptive cable equalizer is a monolithic integrated circuit for equalizing data transmitted over cable (or any media with similar dispersive loss characteristics).
    3. Application:
      • SMPTE 292M, SMPTE 344M, and SMPTE 259M Serial Digital Interfaces
      • Serial Digital Data Equalization and Reception
      • Data Recovery Equalization
    4. Features:
      • SMPTE 292M, SMPTE 344M and SMPTE 259M Compliant
      • Supports DVB-ASI at 270 Mbps
      • Data rates: 125 Mbps to 1.485 Gbps
      • Equalizes up to 200 Meters of Belden 1694A at 1.485 Gbps or up to 400 meters of Belden 1694A at 270 Mbps
      • Manual Bypass and Output Mute with a Programmable Threshold
      • Single-Ended or Differential Input
      • 50Ω Differential Outputs
    5. Delivery time: Usually 5-7 days from distributor
    6. Payment: T/T in advance
  • Driver IC - DRV8832DGQR
    DRV8832DGQR : Driver IC
    1. Low-Voltage Motor Driver IC
    2. Description: The DRV8832 provides an integrated motor driver solution for battery-powered toys, printers, and other low-voltage or battery-powered motion control applications.
    3. Application:
      • Battery-Powered:
        – Printers  – Toys  – Robotics – Cameras – Phones
      • Small Actuators, Pumps, and so forth
    4. Features:
      • H-Bridge Voltage-Controlled Motor Driver
        – Drives DC Motor, One Winding of a Stepper Motor, or Other Actuators/Loads
        – Efficient PWM Voltage Control for Constant Motor Speed With Varying Supply Voltages
        – Low MOSFET On-Resistance: HS + LS 450 mΩ
      • 1-A Maximum DC/RMS or Peak Drive Current
      • 2.75-V to 6.8-V Operating Supply Voltage Range
      • 300-nA (Typical) Sleep Mode Current
    5. Delivery time: Usually 5-7 days from distributor
    6. Payment: T/T in advance
Excellent quality and competitive price make us to have many customers from all over the world. We strongly believe we can provide customers with best

TI IC

and finest service.

Italian, Italiano